此系列产品以超细纤维为主体滤材，采用离心分离、预过滤和精过滤三级净化，能更彻底地去除压缩空气中的油、水、尘，可获得超洁净的干燥压缩空气，过滤精度可达0.1μm,残油量小于0.1mg/m3
工况条件与技术指标
Working Condition Technical Data
-----------------------------------------------------------------------------------
◇进气压力(Inlet pressure): 0.4～1.0MPa
◇进气温度(Inlet temperature): 5℃～65℃
◇初始压降 (Initial pressure drop):≤0.005MPa
◇过滤孔径 (Filtration aperture):5μm
◇除水率 (Water removal rate):≥99%
◇出口气体含油量 (Outlet air oil content):≤10ppm
型号规格与性能参数
Model, Size & Technical Data
型号model | HMR- 001 | HMR- 003 | HMR- 006 | HMR- 010 | HMR- 015 | HMR- 020 | HMR- 030 | HMR- 040 | HMR- 060 | HMR- 080 | HMR- 100 | HMR- 150 | |
空气处理量capacity(Nm3/min) | 1.2 | 3.8 | 6.5 | 10.7 | 15 | 20 | 30 | 40 | 60 | 80 | 100 | 150 | |
空气接管口径air connection | ZG1” | ZG1” | ZG11/2” | ZG2” | DN80 | DN80 | DN80 | DN100 | DN125 | DN125 | DN150 | DN200 | |
排污口口径 draining connection | ZG1/2” | ZG1/2” | ZG1/2” | ZG1/2” | ZG1/2” | ZG1/2” | ZG1/2” | ZG1/2” | ZG1/2” | ZG1/2” | ZG1/2” | ZG1/2” | |
外形尺寸dimensions(mm) | A | 195 | 270 | 300 | 360 | 425 | 425 | 425 | 565 | 730 | 730 | 840 | 840 |
B | 89 | 133 | 159 | 219 | 273 | 273 | 273 | 426 | 529 | 529 | 630 | 630 | |
H | 646 | 660 | 1210 | 1555 | 1555 | 1555 | 1795 | 1750 | 1750 | 1900 | 1950 | 2215 | |
